ANALISIS UJI IMPAK DAN MIKROSTRUKTUR KOMPOSIT MATRIKS RESIN POLYESTER BERPENGISI CANGKANG TELUR AYAM KAMPUNG
DOI:
https://doi.org/10.55334/sostek.v3i2.315Keywords:
Chicken egg shells, Composite, Polyester Resin, Impact, MicrostructureAbstract
Along with the advancement of science and technology, composite materials have developed rapidly. The emergence of new materials is a breakthrough in composite technology. Many wastes around us can be used as materials that can increase the toughness of composites such as chicken egg shells. This study was conducted to determine the toughness and microstructure of composites with variations in the volume fraction of chicken egg shells mixed with polyester resin. The variations in the volume fraction are 10%, 20% 30%, 40%, 50%, and 100% resin (without shells). The specimen tests of this study were impact tests and SEM tests. The results of the study stated that the highest impact test value was found in the 30% fraction variation, namely 19,163 KJ / m2 and the lowest impact test value was found in the 100% fraction variation without egg shell mixture with a value of 4,409 KJ / m2. SEM testing found the particle shape, almost single round shape and lumps with sizes of 2.99 to 16.8 μm and found agglomeration and nano particles have different sizes, there are pores due to wind entering and becoming bubbles when drying the specimen which causes low impact test values.
Keyword: Chicken egg shells, Composite, Polyester Resin, Impact, Microstructure
Downloads
References
Ali Yusuf Muhammad, Marzuki Ismail, P. I. (2020). Teknologi Komposit Indonesia.
CV.ToharMedia. https://scholar.google.com/scholar?hl=id&as_sdt=0,5&cluster=693621682499533564
Amaliyyah, R. (2021). Karakterisasi Sifat Kekuatan Tarik Komposit Laminat Pertikel Cangkang Kerang Simping/E-Glass Menggunakan Matrik Poliester. February, 6.
Anwar, A. S. (2022). Analisis Sifat Mekanik Komposit Rami Epoxy Dengan Penambahan Silikon Karbida (Sic) Sebagai Bahan Plate Rompi Anti Peluru. 8.5.2017, 2003–2005.
Asmeati, Abbas Hammada, Aminy Yusran Ahmad, A. S. (2022). Analysis of duck eggshells as hydroxyapatite with heat treatment method. https://journal.eu- jr.eu/engineering/article/view/2017/1945
Choir, M. J. (2018). Analisa faktor konsebtrasi tegangan pada plat komposit berlubang ganda yang ditarik secara statik dengan susunan lubang berdiagonal terhadap beban.
Dharma Hermawan. (2017). Analisa Sifat Mekanik Serat Kelapa Pada Material Komposit Disusun Oleh : Dharma HermawaN.
Diana, L., Ghani Safitra, A., & Nabiel Ariansyah, M. (2020). Analisis Kekuatan Tarik pada Material Komposit dengan Serat Penguat Polimer. Jurnal Engine: Energi, Manufaktur, Dan Material, 4(2), 59–67.
Duri Kartika, C., RI, kementerian kesehatan, Studi, P., Dokter, P., Kedokteran, F., Udayana, U., מזלי, ר., Oliver, J., Abdul Majid, J., Sulaiman, M., Zailani, S., Shaharudin, M. R., Saw, B., Wu, C. L., Brown, D., Sivabalan, P., Huang, P. H.,
Houston, C., Gooberman-Hill, S., Saskia, T. I. (2015). Pengaruh Serat Kaca Kontinu Terhadap Kekuatan Tarik Dan Sifat Thermal Komposit Polyester/Serat Kaca Lingga. 16(1994), 1–37.
Farizan, R., Mukaromah, A. H., & Sitomurti, D. H. (2018). Penurunan Kadar Ion Fe(II) dalam Air Menggunakan Cangkang Telur Ayam Kampung dengan Variasi Konsentrasi dan Waktu Perendaman. Manuscript, Vi.
F, K.Ge. (1967) ‘Telur ayam ras’, Angewandte Chemie International Edition, 6(11),
–952., pp. 5–20.
Gago, J., & Ngapa, Y. D. (2021). Pemanfaatan cangkang telur ayam sebagai material dasar dalam sintesis hidroksiapatit dengan metode presipitasi basah. Cakra Kimia (Indonesia E-Journal of Applied Chemistry), 9(1), 29–34.
Hastuti, I. W. (2017). Karakterisasi Butiran Sub Mikron Nanomaterial Karbon Batok Kelapa Dengan Variasi Waktu Pengadukan Bahan Yang Digunakan Untuk Filtrasi Logam Fe Dari Limbah Air Selokan Mataram Berdasarkan Uji Uv-Vis, Xrd, Sem Dan Aas.
Irnawan, D., & Karomah, B. (2019). Kajian Ukuran Serbuk Komposit Limbah Cangkang Telur. 1(2), 24–27.
Isyad, M. (2015). Sifat Fisis Dan Mekanis Pada Komposit Polyester Serat Batang Pisang Yang Disusun Asimetri [ 45o / -30o / 45o / -30o ]. 1–17.
Muafiah, A. F. (2019). Studi Proses Pengolahan Cangkang Telur Ayam Menjadi Pupuk Cair Organik Dengan Menggunakan Em4 Sebagai Inokulan. Αγαη, 8(5), 55.
Pujiati, R., & Jadmiko, E. D. I. (2017). Analisa Teknis Bahan Komposit Dari Serat Alami I.
Sabir, A., Abbas, H., Amini, A. Y., & Asmal, S. (2020). Characterization of duck egg shells and bioceramic materials in making denture applications. https://doi.org/10.1088/1757-899X/1088/1/012116
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Asmeati, Muhammad Yusuf Ali, Muhammad Syahrir, Riswandi (Author)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright and Licensing
Authors who publish their work in the Jurnal Sosial dan Teknologi Terapan AMATA agree to the following terms:
The Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license permits anyone to copy, distribute, display, and create derivative works from the original work, including for commercial purposes, provided that the following requirements of the Creative Commons Attribution-ShareAlike 4.0 license are observed:
Key License Terms
- Attribution (BY):
- Users must give appropriate credit to the original copyright holder/author.
- Users must provide a link to the license.
- Users must indicate whether any changes or modifications have been made to the original work.
- ShareAlike (SA):
- If users remix, transform, modify, or create derivative works from the original material, the resulting work must be licensed under the same or a compatible license (CC BY-SA 4.0).
- No Additional Restrictions:
- Users may not impose additional legal or technological restrictions that prevent others from exercising the rights permitted by this license.
What the Public May Do
- Share: Copy and redistribute the material in any format or medium.
- Adapt: Remix, transform, adapt, and create derivative works for any purpose, including commercial purposes.
Note: The copyright holder retains ownership of the original work. This license only grants the public permission to use the work subject to the terms and conditions specified above.
